Title Image

H.C.B-A1135-R

THE COMPACT TOOLBOX TROLLEY (RED)

Length: 520 mm, Width: 840 mm, Height: 1060 mm


• Assembly and Function


1. Install two one-way casters (no.4) and two fixed pin casters (no.5) under the tray (no.6) with hexagon head screws (no.1), washers (no.2), and nuts (no.3). Please install them separately on each side for future use. See Fig.1.


2. On the four corners of the tray (no.6), install four columns (no.7) with the 35 cm part facing down and the 53 cm part up. Fix the columns into the tray (no.6) through 16 oblong holes with raised head screws (no.8), washers (no.9), and nuts (no.10). See Fig .1 #Be sure the raised head screws through center of oblong holes securely then tighten.


3. Fix the screwdriver bars (no.11&no.12) and the front beam (no.13) with raised head screws (no.8), washers (no.9), and nuts (no.10). See Fig.1. #Be sure the screwdriver bars (no.11&no.12) be upon on front beam (no.13) and raised head screw through center of oblong holes of columns securely then tighten.


4. Fix rubber stoppers (no.15) to the back columns (no.7) with round head screws (5mmX15mm) (no.14), washers (no.16), and nuts (no.17). See Fig.1.


5. Insert the all set of drawers into columns (no.7).See Fig.2. Be sure to insert the borders (no.18) of the upper tray into the columns (no.7).See Fig.3 #Be sure the bottom of all set of drawers insert to frame of screwdriver bars (no.11&no.12) and front beam (no.13) securely.


6. Open the lid (no.19). Fix it with raised head screws (no.8), washers (no.9), and nuts (no.10).See
Fig.2.


7. Fix the control handle (no.20) with raised head screws (2-1/4”X15mm) (no.21).See Fig.2.


8. To open the lid all the way to the back, unscrew the screws (no.23).See Fig.4.


9. Use the lever (no.24) to lock the drawers. No.25 is the lock key to the lid.