| Part No. | Part Name | Size (mm) | Q’ty | Material | Hardness |
| 1 | Main Body | L 134 × W 50 × H 16 | 1 | SCM440 | HRC 40 – 45∘ |
| 2 | Nut | H 24 × D: M40 × P 1.5 × d: M16 × P 2.0 | 1 | S45C | HRC 40 – 45∘ |
| 3 | Bolt | H 17 × Ø M 16 × P 2.0 × L 105 | 1 | S45C | HRC 45 – 50∘ |
| 4 | Center Pushing Rod | Ø 22 × L 17 | 1 | S45C | HRC 35 – 40∘ |
| 5 | Screw | M 8 × P 1.25 × L 68 | 2 | SCM | HRC 35 – 40∘ |
| 6 | Screw | M 6 × P 1.0 × L 46 | 2 | SCM | HRC 35 – 40∘ |
| 7 | Washer | D: 13 × d: 6.1 | 2 | S45C | HRC 30 – 35∘ |
• This tool is designed to hold the camshaft pulley stationary while loosening and tightening the center shaft bolt.
• Using the centered screwed rod to uproot the pulley.
• Locking screw: M6, M8.