• Max pressure 6.3 bar (90 psi)
ahd:Vibration level, k Uncertainty ; LPA Sound pressure level dB(A), Kpa = KWA = 3 dB Uncertainty.
Declaration of noise (ISO 15744) and vibration emission (ISO 28927-2)
All values are current as of the date of this publication. These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece and the workstation design, as well upon the eaposure time and the physical condition of the user. We,H.C.B , cannot be held liable for the consequences of using the declared values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which we have no control. This tool may cause hand-arm vibration syndrome if its use is not adequately managed. We recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can be modified to help prevent future impairment.
1.Machine Type
This product is designed for installing and removing threaded fasteners in wood, metal and plastic. No other use permitted. For professional use only.
Please read the product safety information carefully!
2.Implementation and Operation
Connect device as shown in Fig.1.
Fix the accessories properly to the tool.
To switch rotation, push the switch (B) as shown in Fig.1
To start the machine, simply pull the trigger (A). Machine speed is increase by increasing pressure on the trigger. Release the trigger to stop.
To adjust output power, turn the regulator (C) as shown in Fig.2
Use the reverse switch (B) only when the drive spindle comes to a complete stop. Changing the speed before the drive spindle stops may damage the machine.
3.Maintenance
Follow local country environmental regulations for safe handling and disposal of all components
Disassemble and inspect the tool every three 3 months if the tool is used every day. Replace damaged or worm parts.
Always ensure that the machine is disconnected form energy source (compressed air) to avoid accidental operation.
4.Disposal
The disposal of this equipment must follow the legislation of the respective country.
All damaged, badly worm or improperly functioning devices MUST BE AKEN OUT OF OPERATION
Repair only by technical maintenance staff.
5.Declaration of conformity
We :H.C.B NO.25-120, SHIYIZHI, LONGDER VILLAGE, SHUEISHANG TOWNSHIP, CHIAYI COUNTY, 60859, TAIWAN
Declare that the product(s): Impact Wrench
Machine type(s): A2285
Origin of the product: Taiwan