1. Machine Type
• This product is designed for installing and removing threaded fasteners in wood, metal and plastic. No other use permitted. For professional use only.
• Please read the product safety information carefully!
2. Implementation and Operation
• Connect device as shown in Fig.1.
• Fix the accessories properly to the tool.
• To switch rotation, push the switch (B) as shown in Fig.1
• To start the machine, simply pull the trigger (A). Machine speed is increase by increasing pressure on the trigger. Release the trigger to stop.
• To adjust output power, turn the regulator (C) as shown in Fig.2
• Use the reverse switch (B) only when the drive spindle comes to a complete stop. Changing the speed before the drive spindle stops may damage the machine.
3. Maintenance
• Follow local country environmental regulations for safe handling and disposal of all components
• Disassemble and inspect the tool every three 3 months if the tool is used every day. Replace damaged or worm parts.
• Always ensure that the machine is disconnected form energy source (compressed air) to avoid accidental operation.
4. Disposal
• The disposal of this equipment must follow the legislation of the respective country.
• All damaged, badly worm or improperly functioning devices MUST BE AKEN OUT OF OPERATION
• Repair only by technical maintenance staff.
5. Declaration of conformity
We: H.C.B NO.25-120, SHIYIZHI, LONGDER VILLAGE, SHUEISHANG TOWNSHIP, CHIAYI COUNTY, 60859, TAIWAN
Declare that the product(s): Impact Wrench
Machine type(s): A2286
Origin of the product: Taiwan