• Allow the removal of hub with hydraulic cylinder or slide hammer.
• Special designed 17 tons hydraulic cylinder which is hollow with threaded hole can
adjust the position depending on the threaded rod.
• An adaptor can attach to the front of the threaded rod which can easily push out the hub.
• Allow the combination with H.C.B-A3036 air pump to save time and labor.
• P.C.D (Pin Centre Diameter) from 109 mm to 160 mm
• Specification:
| No. | Description | Dimension | Qty’ | Remark |
| 1 | Main Body | D: Ø149 × 113 L | 1 | d: Ø57 × 14 UNC |
| 2 | Slide Hammer Front Nut | D: Ø57 × 14 UNC × 36 L | 1 | d: 5/8” × 10 UNT |
| 3 | Slide Hammer | D: Ø100 × 168 L | 1 | d: Ø22, 10 Kg |
| 4 | Slide Hammer Main Body | Ø65 × 688 L | 1 | D: 5/8” × 10 UNT |
| 5 | Fixing Nut | d: 5/8” × 10 UNT | 1 | H24 |
| 6 | Hollow Hydraulic Cylinder | 17 tons | 1 | |
| 7 | Threaded Rod | D: Ø21 x 335 L | 1 | M20 x P2.5, H17 |
| 8 | Pushing adaptor | D: Ø26 x 45 L | 1 | D: Ø17.4 |
| P3&P4 | Adaptor | Dr. 3/8” | 1 |